SCM25A-PRO-MK2 - Compact 3-Way Active Loudspeaker
The SCM25A Pro Mk2 is a compact 3-way high-performance active studio monitor loudspeaker, based around a 6.5''/164mm bass driver loaded in a 25-litre vented cabinet. The monitor’s combination of exceptional mid-range clarity, high-output, extended bass response and modest size make it ideal for nearfield monitoring across a wide range of critical applications.
The 3-way monitor features proprietary drive units designed and manufactured by ATC. Low frequencies below 380Hz are handled by a 6.5''/164mm bass driver, mid-range frequencies between 380Hz & 3.5kHz by the ATC 3”/75mm soft dome mid-driver. High frequencies above 3.5kHz are handled by ATC’s SH25-76S Dual-Suspension 1''/25mm soft dome tweeter. This HF driver update is the primary improvement from the Mk1-to-Mk2 model. The enclosure is a ported/vented type, tuned to 32Hz and featuring a 3''/75mm diameter port with flared entry & exit to minimise port air noise.
The SCM25A Pro Mk2 is actively driven by a 3-way class A/B amp pack mounted in the rear of the cabinet. Each drive unit has its own dedicated power amplifier. Audio input is via a rear panel mounted 3-pin female XLR and power via an IEC mains power inlet. There are user controls for input sensitivity and bass ‘boost’. Crossovers are 4th order Linkwitz-Riley and all-pass filters are included to optimise the phase response through the crossover regions, improving the tonal accuracy, imaging, on and off-axis frequency response. FET peak limiters are included to reduce amplifier ‘hard-clipping’. Power ‘on’ and limiter ‘active’ is indicated by a front panel mounted bi-colour LED.
Features
- 3-way design featuring ATC SM75-150 Soft Dome mid-range driver
- Wide dispersion vs frequency for excellent stereo imaging over a large listening area
- ATC discrete MOSFET class A/B amp-pack delivers high dynamic range in combination with very low distortion and an extended HF bandwidth
- 4th order active crossovers with all-pass phase compensation ensure outstanding driver integration
- Input sensitivity and bass ‘lift’ user controls
- Hand-built in England
- 6-year warranty
Technical Specifications
- Drive Units: Bass: 1 x SB50-164SC 8Ω, Mid: 1 x SM75-150 16Ω, HF: 1 x SH25-76S 6Ω
- Low Frequency Cut-off (-6dB, anechoic): 47Hz
- High Frequency Cut-off (-6dB): 25kHz (-6dB)
- Max SPL: 109dB continuous / 115dB peak (Per pair, IEC Weighted Pink Noise, 1m, anechoic).
- Sensitivity: +4dBu ref 92dBC (Bass Boot 0dB, Input Sensitivity 1V, Pink noise).
- Balanced Input: 1 x Rear Panel Mounted Female XLR, pin 2 hot.
- Input Impedance: 20kΩ (differential).
- Input CMRR: > 82dB (10kHz).
- Input Sensitivity: 2.2dBu / 1Vrms for full power, control: Continuously Variable from 2.2dBu – 8.2dBu / 1Vrms - 2Vrms (-6dB)
- Bass Boost Control: Continuously variable from 0dB to +3dB.
- Crossover Filters: 4th Order Linkwitz-Riley at 380Hz and 3.5kHz.
- Frequency Response: 200kHz (-3dB).
- Amplifier type: Grounded Source MOSFET based Class A/B, convection cooled.
- Output Power: Bass: 150W (8Ω), Mid: 60W (8Ω), HF: 32W (6Ω)
- THD+N: < 0.003%/-92dB (1kHz, 1dB below rated power, 90kHz BW)
- Limiter: ATC Active FET Momentary Gain Reduction, limiter ‘active’ indicated via front panel LED.
- Mains Input: 220-230V or 115V
- Power Consumption: Idle 24W/35VA. 1/8th Power 117W/159VA. Full Power 255W/324VA.
- Heat Output: Idle 82BTU/hr. 1/8th power 335 BTU/hr. Full Power 358BTU/hr.
- Weight: 25.1kg
- Dimensions (H x W x D): 271 x 430 x 411 mm